 |
 |
 |
 |
PETROWRAP ANTI-CORROSION SYSTEM APPLICATION INSTRUCTIONS* Remove all contaminants such as dirt, oil, scale and excessive moisture.
* Brush PetroWrap Primer A evenly over surface to displace remaining moisture and ensure proper adhesion.
* Press PetroWrap Mastic B into surface irregularities to eliminate air pockets.
* Wrap PetroWrap Tape C spirally around prepared surface using even tension. An overlap of 55% is recommended to assure total protection.
* Finish with PetroWrap Overwrap D applied like PetroWrap Tape to prevent mechanical damage as required.
 |
 |
 |
 |
